Free project tool

Solar Street Light Calculator

Enter your road length, width and lighting needs. The calculator estimates how many solar street lights you need, the pole height and spacing, LED wattage, battery capacity and solar panel size, and recommends matching WilSolar all-in-one models.

Your project estimate

This road needs more light than our 140 W models give at normal spacing, so the spacing has been reduced. Talk to us about a higher-power or split-system design.

Recommended WilSolar models

Get the full project plan as a PDF

Includes all inputs, the recommended configuration, matching models and how each number was calculated. Ready to share with your team or client.

Your company details

Fill in all fields to download the plan. Our engineering team may contact you to confirm the configuration.

    We use these details only to send this plan and follow up on your project. We never share them.

    Your project plan has been downloaded. Our team has received your request and will review the configuration with you.

    Estimates use engineering rules of thumb and are for preliminary planning only. Final configuration is confirmed after reviewing your site.

    How it works

    How the calculator sizes a solar street light project

    The calculator follows the same steps a lighting engineer uses for a first estimate. Every assumption is shown so you can check it against your project specification.

    1. Mounting height from road width: about 6 m for roads up to 5 m wide, 7 m up to 8 m, 8 m up to 12 m and 10–12 m for wider roads. Roads wider than about 10 m get lights on both sides in a staggered layout.
    2. Spacing from height: about 4 x the height on village roads, 3.5 x on residential and municipal roads and 3 x on main roads.
    3. Light output: lumens per light = target average illuminance x spacing x lit width / (utilisation 0.45 x maintenance 0.8). Targets used: 5 lux village roads, 7.5 lux residential streets and seaside or island roads, 10 lux municipal roads and industrial parks, 15 lux main roads. LED power assumes about 150 lumens per watt.
    4. Night energy: full output for the first 4 hours, 70% for the next 2 hours and 50% for the rest of the night.
    5. Battery: nightly energy x cloudy days / 0.9 usable depth of discharge, shown in Wh and in Ah at 12.8 V LiFePO4.
    6. Solar panel: nightly energy / (design peak sun hours x 0.75 system efficiency) x 1.2 recovery margin. Design sun hours used: Africa 4.5, Southeast Asia 4.0, South Asia 4.2, Middle East 5.0, Latin America 4.2, Europe 2.5.

    Example results

    ProjectInputsLayoutLED per lightBattery per lightSolar panelMatching models
    Village road, Africa1 km x 5 m, 12 h, 3 cloudy days43 lights, 6 m poles, 24 m spacing15 Wabout 420 Whabout 45 WWIL-PD-15
    Residential street, Latin America300 m x 6 m, 12 h, 2 cloudy days13 lights, 7 m poles, 25 m spacing25 Wabout 470 Whabout 80 WWIL-PD-25 / WIL-KG-25
    Municipal road, Southeast Asia2 km x 8 m, 12 h, 3 cloudy days81 lights, 7 m poles, 25 m spacing40 Wabout 1,120 Whabout 135 WWIL-DU-40 / WIL-VG-40 / WIL-GD-40
    Industrial park, Middle East500 m x 10 m, 12 h, 2 cloudy days19 lights, 8 m poles, 28 m spacing55 Wabout 1,030 Whabout 150 WWIL-WF-55
    Main road, Africa5 km x 20 m, 12 h, 3 cloudy days, 12 m poles280 lights, 12 m poles, 36 m spacing (both sides)120 Wabout 3,360 Whabout 360 WWIL-OB-120

    Read more: Solar Street Light Sizing: 7 Inputs a Supplier Needs Before Quoting · All-in-One vs Split Solar Street Light · What a BMS Does in a Solar Street Light Battery

    FAQ

    Solar street light sizing questions

    How many solar street lights do I need for 1 km of road?

    It depends on pole height and road type. On a 5 m wide village road with 6 m poles, spacing of about 24 m gives roughly 43 lights per kilometre on one side. A wider municipal road with 7–8 m poles typically uses 25–28 m spacing, or about 37–41 lights per kilometre on one side; roads wider than about 10 m usually need lights on both sides.

    What spacing should solar street lights have?

    A common rule is about 3–4 times the mounting height: around 3.5 x height for municipal roads, up to 4 x for village roads, and about 3 x for main roads that need more light. The spacing is then checked against the target illuminance and the LED power available.

    How big should the battery be?

    Multiply the light’s nightly energy by the number of cloudy days it must survive, then divide by the usable depth of discharge (about 0.9 for LiFePO4). For a 40 W light running 12 hours with dimming and 3 days of autonomy, that is roughly 1,100 Wh, or about 90 Ah at 12.8 V.

    How do I size the solar panel?

    Divide the nightly energy by the design peak sun hours of your region and a system efficiency of about 0.75, then add a 20% margin so the battery recovers after cloudy days. Regions with fewer sun hours need a larger panel for the same light.

    Is the calculator result a final design?

    No. It is a preliminary estimate based on rules of thumb. WilSolar confirms the final model, lumens, battery and panel after reviewing your site location, road layout and lighting standard.

    Chat with us