
WA-INV6348 6300W Hybrid Solar Inverter (48V)
A hybrid solar inverter that manages the complete energy flow between PV arrays, battery storage, grid and loads. Pure sine wave output, built-in MPPT tracking, RS485 / RS232 / WiFi communication and parallel-ready models for higher power — designed to pair with lithium battery storage in home and commercial systems.
Matching the WA-INV6348 to your system
The WA-INV6348 is the 48V workhorse: 6300W of output with a 7000W single-MPPT solar input.
| Rated output power | 6300W, pure sine wave |
| Battery platform | 48Vdc (range 42-60Vdc), lithium battery |
| Solar input | 7000W max, MPPT tracking 40-450Vdc, rated PV input 240Vdc |
| Typical pairing | 5-7kW PV array with 48V lithium battery bank |
Product detail and specifications
Output and AC
| Rated Input Voltage | 220V |
| Input Voltage Range | 170-280V / 90-280V |
| Input Frequency Range | 50Hz / 60Hz |
| Output Voltage | 220V-240V |
| Output Frequency | 50/60Hz ±1% |
| Waveform | Pure sine wave |
| Output Rated Power | 6300W |
Solar input and MPPT
| Maximum PV Input Power | 7000W |
| MPPT Tracking Voltage Range | 40Vdc-450Vdc |
| Rated PV Input Voltage | 240Vdc |
| Maximum PV Input Current | 18A |
| MPPT Tracking Channels | 1 |
Battery and general info
| Rated Battery Voltage | 48Vdc |
| Battery Voltage Range | 42-60Vdc |
| Battery Type | Lithium battery |
| Communication Port | RS485, RS232, WiFi |
| Operating Temp | -10°C to 50°C |
| Storage Temp | -15°C to 60°C |
| Humidity | 0%-95%, no condensation |
| Noise | ≤55dB |
| Product Size | 390 × 320 × 112 mm |
Applications and supported loads
- Home solar + storage: pairs with lithium battery banks to store daytime solar energy for night use and grid outages
- Commercial rooftop systems: higher-power models with dual MPPT trackers serve shops, offices and small factories
- Backup power: fast switchover keeps essential loads alive when the grid fails
- Off-grid systems: runs loads directly from PV and battery in locations without grid power
Information needed for a quotation
Send us these details
1. Total PV array size (W) and panel configuration (series / parallel)
2. Battery bank voltage and chemistry (lithium recommended)
3. Continuous and peak load to be supported
4. Single-phase or three-phase requirement, destination country
5. OEM requirements: logo, colour, packaging and manual language
Common buyer questions
What is the difference between WA-INV6348 and the 1148 / 1248 models?
Output power and solar architecture: the 6348 delivers 6300W with one MPPT tracker (7000W PV); the 1148 and 1248 deliver 10300W and 12300W with dual MPPT trackers (2 × 6000W PV) for larger or dual-face roof arrays.
Can I monitor the system remotely?
Yes. RS485 / RS232 communication and WiFi monitoring are supported — ask for the monitoring module and app details with your quotation.
Which battery bank should I use?
A 48V lithium battery bank within the 42-60Vdc operating window. Our WA-B48100 / B48200 / B48314 batteries are designed to pair with this inverter family.
Is OEM branding available?
Yes, including logo, colour, packaging and manual language, subject to minimum order quantity.
Get a quotation for the WA-INV6348
Send your load list, destination and project requirements to receive the datasheet, configuration proposal and quotation.