Home / Energy Storage Systems / WA-10000 All-in-One Solar Power System (8038Wh)
Wil Solar WA-10000 all-in-one LiFePO4 solar power storage system 8038Wh
All-in-One Solar Power System · Model WA-10000

WA-10000 All-in-One Solar Power System (8038Wh)

An integrated solar energy storage unit that combines a hybrid inverter, MPPT solar charge controller, intelligent BMS with built-in circuit breaker and LiFePO4 battery in one cabinet. It charges from both solar PV panels and the AC grid, and switches to backup mode automatically during power outages — a complete home or small-business backup power source in a single unit.

3500W Hybrid InverterMPPT charging with built-in UPS
8038Wh LiFePO4 Battery25.6V 314Ah with intelligent BMS
5000W Solar InputMPPT range 120-450VDC
Project Supply & OEMLogo, colour and packaging options
Planning

Is the WA-10000 the right size for your project?

The WA-10000 keeps the 3500W inverter of the WA-5000 but doubles the battery to 8038Wh — suited to longer outages or higher daily consumption.

Rated output power3500W, pure sine wave inverter with UPS function
Stored energy8038Wh (25.6V 314Ah LiFePO4)
Solar input5000W max PV array, MPPT range 120-450VDC
Typical useOvernight + morning backup for larger households, small shops
Planning notice: Actual backup time depends on the load profile and ambient temperature. Send your requirement list and we will confirm the recommended configuration in writing.
Product Details

Product detail and specifications

Output and AC

Rated Output Power3500W
AC Input Voltage220V-230V
AC Voltage Range170-280Vac
Frequency Range50Hz / 60Hz
Grid Voltage230Vac±5%
Grid Frequency50Hz
Grid Efficiency95%

Solar input and charging

Maximum PV Array Power5000W
Max PV Open-Circuit Voltage500VDC
MPPT Operating Range120-450VDC
MPPT Quantity1
Charging Mode3-stage charging
Max MPPT Charging Current80A
Max AC Charging Current80A
Max Charging Current100A
Cold Start Voltage23V

Battery and general info

Battery Voltage24V (8S LiFePO4)
Nominal Capacity314Ah
Rated Energy8038Wh
Protection FunctionsOutput short circuit, overload, over-temperature
Operating / Storage Temp-10°C-50°C / -15°C-60°C
Relative Humidity5%-95%
Dimension800 × 500 × 260 mm
Weight70 kg
ModelWA-10000
Applications

Applications and supported loads

  • Home backup power: keeps refrigerators, lighting, routers, TVs and kitchen appliances running during outages with automatic UPS switchover
  • Solar self-consumption: charges from rooftop PV panels by day and powers the home at night to reduce electricity bills
  • Shops, farms and small offices: lights, fans, computers, POS equipment and small machinery in areas with unstable grids
  • Off-grid living: cabins, guard posts and telecom sites where no grid connection is available
Customization

Information needed for a quotation

Send us these details

1. Daily energy consumption (kWh) and peak load of the property
2. Roof or ground area available for PV panels
3. Backup power requirements during grid outages
4. Destination country, port and order quantity
5. OEM requirements: logo, colour and packaging

FAQ

Common buyer questions

What is included in the all-in-one system?

Each unit integrates the hybrid inverter, MPPT solar charge controller, LiFePO4 battery with intelligent BMS and a built-in circuit breaker. Only PV panels and AC wiring are needed on site, which makes installation far simpler than assembling separate components.

Can it work without the grid?

Yes. The unit supports both solar PV charging and AC grid charging, and can run off-grid. When the grid fails it switches to backup mode automatically (built-in UPS function).

Which battery chemistry is used?

The built-in battery is LiFePO4 (lithium iron phosphate), managed by an intelligent BMS with output short circuit, overload and over-temperature protection.

Can we order with our own branding?

Yes. OEM and ODM supply is available, including logo, colour and packaging. Minimum order quantity and tooling details are confirmed at quotation.

Project Inquiry

Get a quotation for the WA-10000

Send your load list, destination and project requirements to receive the datasheet, configuration proposal and quotation.

Chat with us