Home / Energy Storage Systems / WA-INV1148 10300W Hybrid Solar Inverter (48V, Dual MPPT)
Wil Solar WA-INV1148 10300W 48V dual-MPPT hybrid solar inverter
Hybrid Solar Inverter · Model WA-INV1148

WA-INV1148 10300W Hybrid Solar Inverter (48V, Dual MPPT)

A hybrid solar inverter that manages the complete energy flow between PV arrays, battery storage, grid and loads. Pure sine wave output, built-in MPPT tracking, RS485 / RS232 / WiFi communication and parallel-ready models for higher power — designed to pair with lithium battery storage in home and commercial systems.

10300W Pure Sine Output220V-240V, 50/60Hz
2 × 6000W PV InputDual MPPT 80-450VDC, 22A × 2
48V Lithium BatteryRS485 / RS232 / WiFi monitoring
Large-Capacity Platform535 × 462 × 117 mm
Planning

Matching the WA-INV1148 to your system

The WA-INV1148 serves larger homes and light-commercial sites: 10300W of output and two independent MPPT trackers.

Rated output power10300W, pure sine wave
Battery platform48Vdc (range 42-60Vdc), lithium battery
Solar input2 × 6000W max, dual MPPT 80-450Vdc, rated PV input 280Vdc
Typical pairing10-12kW PV across two strings, 48V battery bank
Planning notice: Each MPPT channel is independent — two roof faces with different orientations can be connected directly. Send your requirement list and we will confirm the recommended configuration in writing.
Product Details

Product detail and specifications

Output and AC

Rated Input Voltage220V
Input Voltage Range170-280V / 90-280V
Input Frequency Range50Hz / 60Hz
Output Voltage220V-240V
Output Frequency50/60Hz ±1%
WaveformPure sine wave
Output Rated Power10300W

Solar input and MPPT

Maximum PV Input Power6000W × 2
MPPT Tracking Voltage Range80Vdc-450Vdc
Rated PV Input Voltage280Vdc
Maximum PV Input Current22A × 2
MPPT Tracking Channels2

Battery and general info

Rated Battery Voltage48Vdc
Battery Voltage Range42-60Vdc
Battery TypeLithium battery
Communication PortRS485, RS232, WiFi
Operating Temp-10°C to 50°C
Storage Temp-15°C to 60°C
Humidity0%-95%, no condensation
Noise≤55dB
Product Size535 × 462 × 117 mm
Applications

Applications and supported loads

  • Home solar + storage: pairs with lithium battery banks to store daytime solar energy for night use and grid outages
  • Commercial rooftop systems: higher-power models with dual MPPT trackers serve shops, offices and small factories
  • Backup power: fast switchover keeps essential loads alive when the grid fails
  • Off-grid systems: runs loads directly from PV and battery in locations without grid power
Customization

Information needed for a quotation

Send us these details

1. Total PV array size (W) and panel configuration (series / parallel)
2. Battery bank voltage and chemistry (lithium recommended)
3. Continuous and peak load to be supported
4. Single-phase or three-phase requirement, destination country
5. OEM requirements: logo, colour, packaging and manual language

FAQ

Common buyer questions

Why two MPPT trackers?

Dual trackers let you connect two PV strings with different orientations or tilt angles without an external combiner, recovering energy that a single-tracker design would lose.

Can I monitor the system remotely?

Yes. RS485 / RS232 communication and WiFi monitoring are supported — ask for the monitoring module and app details with your quotation.

Which battery bank should I use?

A 48V lithium battery bank within the 42-60Vdc operating window. Our WA-B48100 / B48200 / B48314 batteries are designed to pair with this inverter family.

Is OEM branding available?

Yes, including logo, colour, packaging and manual language, subject to minimum order quantity.

Project Inquiry

Get a quotation for the WA-INV1148

Send your load list, destination and project requirements to receive the datasheet, configuration proposal and quotation.

Chat with us