
WA-INV1148 10300W Hybrid Solar Inverter (48V, Dual MPPT)
A hybrid solar inverter that manages the complete energy flow between PV arrays, battery storage, grid and loads. Pure sine wave output, built-in MPPT tracking, RS485 / RS232 / WiFi communication and parallel-ready models for higher power — designed to pair with lithium battery storage in home and commercial systems.
Matching the WA-INV1148 to your system
The WA-INV1148 serves larger homes and light-commercial sites: 10300W of output and two independent MPPT trackers.
| Rated output power | 10300W, pure sine wave |
| Battery platform | 48Vdc (range 42-60Vdc), lithium battery |
| Solar input | 2 × 6000W max, dual MPPT 80-450Vdc, rated PV input 280Vdc |
| Typical pairing | 10-12kW PV across two strings, 48V battery bank |
Product detail and specifications
Output and AC
| Rated Input Voltage | 220V |
| Input Voltage Range | 170-280V / 90-280V |
| Input Frequency Range | 50Hz / 60Hz |
| Output Voltage | 220V-240V |
| Output Frequency | 50/60Hz ±1% |
| Waveform | Pure sine wave |
| Output Rated Power | 10300W |
Solar input and MPPT
| Maximum PV Input Power | 6000W × 2 |
| MPPT Tracking Voltage Range | 80Vdc-450Vdc |
| Rated PV Input Voltage | 280Vdc |
| Maximum PV Input Current | 22A × 2 |
| MPPT Tracking Channels | 2 |
Battery and general info
| Rated Battery Voltage | 48Vdc |
| Battery Voltage Range | 42-60Vdc |
| Battery Type | Lithium battery |
| Communication Port | RS485, RS232, WiFi |
| Operating Temp | -10°C to 50°C |
| Storage Temp | -15°C to 60°C |
| Humidity | 0%-95%, no condensation |
| Noise | ≤55dB |
| Product Size | 535 × 462 × 117 mm |
Applications and supported loads
- Home solar + storage: pairs with lithium battery banks to store daytime solar energy for night use and grid outages
- Commercial rooftop systems: higher-power models with dual MPPT trackers serve shops, offices and small factories
- Backup power: fast switchover keeps essential loads alive when the grid fails
- Off-grid systems: runs loads directly from PV and battery in locations without grid power
Information needed for a quotation
Send us these details
1. Total PV array size (W) and panel configuration (series / parallel)
2. Battery bank voltage and chemistry (lithium recommended)
3. Continuous and peak load to be supported
4. Single-phase or three-phase requirement, destination country
5. OEM requirements: logo, colour, packaging and manual language
Common buyer questions
Why two MPPT trackers?
Dual trackers let you connect two PV strings with different orientations or tilt angles without an external combiner, recovering energy that a single-tracker design would lose.
Can I monitor the system remotely?
Yes. RS485 / RS232 communication and WiFi monitoring are supported — ask for the monitoring module and app details with your quotation.
Which battery bank should I use?
A 48V lithium battery bank within the 42-60Vdc operating window. Our WA-B48100 / B48200 / B48314 batteries are designed to pair with this inverter family.
Is OEM branding available?
Yes, including logo, colour, packaging and manual language, subject to minimum order quantity.
Get a quotation for the WA-INV1148
Send your load list, destination and project requirements to receive the datasheet, configuration proposal and quotation.