
WA-15000 All-in-One Solar Power System (16076Wh)
An integrated solar energy storage unit that combines a hybrid inverter, MPPT solar charge controller, intelligent BMS with built-in circuit breaker and LiFePO4 battery in one cabinet. It charges from both solar PV panels and the AC grid, and switches to backup mode automatically during power outages — a complete home or small-business backup power source in a single unit.
Is the WA-15000 the right size for your project?
The WA-15000 is the flagship of the range: a 6300W inverter on a 48V platform with 16076Wh of storage — for properties with heavy loads or long autonomy requirements.
| Rated output power | 6300W, pure sine wave inverter with UPS function |
| Stored energy | 16076Wh (51.2V 314Ah LiFePO4) |
| Solar input | 5500W max PV array, MPPT range 120-450VDC |
| Typical use | Large homes, farms, guest houses and small commercial sites |
Product detail and specifications
Output and AC
| Rated Output Power | 6300W |
| AC Input Voltage | 220V-230V |
| AC Voltage Range | 170-280Vac |
| Frequency Range | 50Hz / 60Hz |
| Grid Voltage | 230Vac±5% |
| Grid Frequency | 50Hz |
| Grid Efficiency | 95% |
Solar input and charging
| Maximum PV Array Power | 5500W |
| Max PV Open-Circuit Voltage | 500VDC |
| MPPT Operating Range | 120-450VDC |
| MPPT Quantity | 1 |
| Charging Mode | 3-stage charging |
| Max MPPT Charging Current | 100A |
| Max AC Charging Current | 80A |
| Max Charging Current | 120A |
| Cold Start Voltage | 23V |
Battery and general info
| Battery Voltage | 48V (16S LiFePO4) |
| Nominal Capacity | 314Ah |
| Rated Energy | 16076Wh |
| Protection Functions | Output short circuit, overload, over-temperature |
| Operating / Storage Temp | -10°C-50°C / -15°C-60°C |
| Relative Humidity | 5%-95% |
| Dimension | 1100 × 500 × 260 mm |
| Weight | 140 kg |
| Model | WA-15000 |
Applications and supported loads
- Home backup power: keeps refrigerators, lighting, routers, TVs and kitchen appliances running during outages with automatic UPS switchover
- Solar self-consumption: charges from rooftop PV panels by day and powers the home at night to reduce electricity bills
- Shops, farms and small offices: lights, fans, computers, POS equipment and small machinery in areas with unstable grids
- Off-grid living: cabins, guard posts and telecom sites where no grid connection is available
Information needed for a quotation
Send us these details
1. Daily energy consumption (kWh) and peak load of the property
2. Roof or ground area available for PV panels
3. Backup power requirements during grid outages
4. Destination country, port and order quantity
5. OEM requirements: logo, colour and packaging
Common buyer questions
What is included in the all-in-one system?
Each unit integrates the hybrid inverter, MPPT solar charge controller, LiFePO4 battery with intelligent BMS and a built-in circuit breaker. Only PV panels and AC wiring are needed on site, which makes installation far simpler than assembling separate components.
Can it work without the grid?
Yes. The unit supports both solar PV charging and AC grid charging, and can run off-grid. When the grid fails it switches to backup mode automatically (built-in UPS function).
Which battery chemistry is used?
The built-in battery is LiFePO4 (lithium iron phosphate), managed by an intelligent BMS with output short circuit, overload and over-temperature protection.
Can we order with our own branding?
Yes. OEM and ODM supply is available, including logo, colour and packaging. Minimum order quantity and tooling details are confirmed at quotation.
Does the WA-15000 use a different battery platform?
Yes. While the smaller models use a 24V (8S) LiFePO4 pack, the WA-15000 uses a 48V (16S) pack. The higher bus voltage keeps current and cable losses low at 6300W output.
Get a quotation for the WA-15000
Send your load list, destination and project requirements to receive the datasheet, configuration proposal and quotation.