Home / Energy Storage Systems / WA-INV6348 6300W Hybrid Solar Inverter (48V)
Wil Solar WA-INV6348 6300W 48V hybrid solar inverter with MPPT and WiFi
Hybrid Solar Inverter · Model WA-INV6348

WA-INV6348 6300W Hybrid Solar Inverter (48V)

A hybrid solar inverter that manages the complete energy flow between PV arrays, battery storage, grid and loads. Pure sine wave output, built-in MPPT tracking, RS485 / RS232 / WiFi communication and parallel-ready models for higher power — designed to pair with lithium battery storage in home and commercial systems.

6300W Pure Sine Output220V-240V, 50/60Hz
7000W PV InputMPPT 40-450VDC, 18A
48V Lithium BatteryRS485 / RS232 / WiFi monitoring
Tower Form Factor390 × 320 × 112 mm
Planning

Matching the WA-INV6348 to your system

The WA-INV6348 is the 48V workhorse: 6300W of output with a 7000W single-MPPT solar input.

Rated output power6300W, pure sine wave
Battery platform48Vdc (range 42-60Vdc), lithium battery
Solar input7000W max, MPPT tracking 40-450Vdc, rated PV input 240Vdc
Typical pairing5-7kW PV array with 48V lithium battery bank
Planning notice: Array voltage must stay within the MPPT window at the site’s lowest temperature. Send your requirement list and we will confirm the recommended configuration in writing.
Product Details

Product detail and specifications

Output and AC

Rated Input Voltage220V
Input Voltage Range170-280V / 90-280V
Input Frequency Range50Hz / 60Hz
Output Voltage220V-240V
Output Frequency50/60Hz ±1%
WaveformPure sine wave
Output Rated Power6300W

Solar input and MPPT

Maximum PV Input Power7000W
MPPT Tracking Voltage Range40Vdc-450Vdc
Rated PV Input Voltage240Vdc
Maximum PV Input Current18A
MPPT Tracking Channels1

Battery and general info

Rated Battery Voltage48Vdc
Battery Voltage Range42-60Vdc
Battery TypeLithium battery
Communication PortRS485, RS232, WiFi
Operating Temp-10°C to 50°C
Storage Temp-15°C to 60°C
Humidity0%-95%, no condensation
Noise≤55dB
Product Size390 × 320 × 112 mm
Applications

Applications and supported loads

  • Home solar + storage: pairs with lithium battery banks to store daytime solar energy for night use and grid outages
  • Commercial rooftop systems: higher-power models with dual MPPT trackers serve shops, offices and small factories
  • Backup power: fast switchover keeps essential loads alive when the grid fails
  • Off-grid systems: runs loads directly from PV and battery in locations without grid power
Customization

Information needed for a quotation

Send us these details

1. Total PV array size (W) and panel configuration (series / parallel)
2. Battery bank voltage and chemistry (lithium recommended)
3. Continuous and peak load to be supported
4. Single-phase or three-phase requirement, destination country
5. OEM requirements: logo, colour, packaging and manual language

FAQ

Common buyer questions

What is the difference between WA-INV6348 and the 1148 / 1248 models?

Output power and solar architecture: the 6348 delivers 6300W with one MPPT tracker (7000W PV); the 1148 and 1248 deliver 10300W and 12300W with dual MPPT trackers (2 × 6000W PV) for larger or dual-face roof arrays.

Can I monitor the system remotely?

Yes. RS485 / RS232 communication and WiFi monitoring are supported — ask for the monitoring module and app details with your quotation.

Which battery bank should I use?

A 48V lithium battery bank within the 42-60Vdc operating window. Our WA-B48100 / B48200 / B48314 batteries are designed to pair with this inverter family.

Is OEM branding available?

Yes, including logo, colour, packaging and manual language, subject to minimum order quantity.

Project Inquiry

Get a quotation for the WA-INV6348

Send your load list, destination and project requirements to receive the datasheet, configuration proposal and quotation.

Chat with us